Red Hat NETWORK 4.0.5 - CHANNEL MANAGEMENTT GUIDE Guide de dépannage télécharger pdf (Page 24)

F5 SDC Troubleshooting Guide

Proprietary and Confidential Information of F5 Networks

5 SDC Pipeline

Licensing and Access Control

Remote client peer fails to open a link to the SDC.

4.4.1 Error Description

Client peer sends a proper CER to the SDC, but link is not established.

4.4.2 Causes

 The SDC is configured not to allow connection to unknown peers

 The remote peer is sending the CER messages to an IP address not licensed by

 No common application-IDs between client peer to SDC

4.4.3 Resolution

 Check the CPF log for error messages (verify in all CPF nodes), and the NMS

platform for SNMP traps

 If “peer rejected” messages appear:

- In the Web UI, select Topology and then in the Access Control List

section, enable the Accept Unknown Peers checkbox.

- Configure the remote peer manually and validate the remote peer

connection to the destination IP as follows:

In the Web UI, select Administration tab and verify that a valid license

exists for the relevant peer

CPF Routing

This section describes commonly found errors, their causes, symptoms, and resolutions related

to CPF routing functionality.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 41 42

Pas de commentaire

Red Hat NETWORK 4.0.5 - CHANNEL MANAGEMENTT GUIDE Guide de dépannage Page 24