Red Hat SYSTEM 8.0 - MIGRATION GUIDE 7.X TO 8.0 Guide d'installation télécharger pdf (Page 25)

Upgrade Instructions  25

Upgrade Instructions: Web Security Gateway

Step 10: Upgrade software instances of Content Gateway

Content Gateway runs on Websense full policy source, user directory and filtering,

and filtering only appliances (all of which should already have been upgraded at this

point).

Content Gateway is also:

 Certified on Red Hat Enterprise Linux, updates 4 and 5

 Kernel version for 6.5: 2.6.32-431 (not recommended for v7.8.3 Content

Gateway)

 Kernel version for 6.4: 2.6.32-358

 Supported on Red Hat Enterprise Linux and CentOS 6, updates 0, 1, 2, 3, 4, and 5

 Kernel version for 6.3: 2.6.32-279

 Kernel version for 6.2: 2.6.32-220

 Kernel version for 6.1: 2.6.32-131

 Kernel version for 6.0: 2.6.32-71

To display the kernel version installed on your system, enter the command:

/bin/uname -r

If you have software instances of Content Gateway, make sure the host system meets

the following hardware requirements before upgrading:

CPU Quad-core running at 2.8 GHz or faster

Memory 6 GB minimum

8 GB recommended

Disk Space 2 disks:

 100 GB for the operating system, Content Gateway, and temporary

data.

 Max 147 GB for caching

If caching will not be used, this disk is not required.

The caching disk:

– Should be at least 2 GB and no more than 147 GB

– Must be a raw disk, not a mounted file system

– Must be dedicated

–Must not be part of a software RAID

– Should be, for best performance, a 10K RPM SAS disk on a

controller that has at least 64 MB of write-through cache

Network

Interfaces

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 43 44

Pas de commentaire

Red Hat SYSTEM 8.0 - MIGRATION GUIDE 7.X TO 8.0 Guide d'installation Page 25