Red Hat Server tc3100 Guide de l'utilisateur télécharger pdf (Page 124)

124 Removal and Replacement

5 Slide the replacement power supply into the empty slot (D in Figure 57). The

power supply begins to engage the midplane with 3/8 inch (8mm) still

exposed.

6 Rotate the handles back toward the center of the power supply module to

draw the power supply the last 3/8 inch into the chassis and firmly seat the

power supply on the midplane. The power supply should be flush with the

edge of the chassis.

7 Tighten the thumbscrews on the power supply handles (A and B). It is

recommended that you use a screwdriver to ensure proper seating.

8 Plug the power cord into the power supply and electrical source.

9 Monitor the power supply LED. It should turn green. If the LED is dark or

stays amber, see Chapter 4, Troubleshooting.

1 2 ... 119 120 121 122 123 124 125 126 127 128 129 ... 157 158

Pas de commentaire

Red Hat Server tc3100 Guide de l'utilisateur Page 124