Red Hat Server tc3100 Guide de l'utilisateur télécharger pdf (Page 138)

138 Removal and Replacement

Reinstalling the deskside base and external covers on the disk

system.

1 Place the deskside external cover on its top, on a sturdy surface.

2 Lift the disk system chassis into the cover, onto the alignment pins. The disk

system should be installed into the cover with the power switch down (toward

the closed part of the cover).

3 Secure the base to the cover using four M5 screws. Tighten the screws using a

Torx T25 driver. They are the four screws that are closest to the edges of the

base.

4 Secure the base to the chassis using four M5 screws. Tighten the screws using

a Torx T25 driver. They are the four screws that are closest to the edges of the

base.

1 2 ... 133 134 135 136 137 138 139 140 141 142 143 ... 157 158

Pas de commentaire

Red Hat Server tc3100 Guide de l'utilisateur Page 138