Red Hat Server tc3100 Guide de l'utilisateur télécharger pdf (Page 91)

Configuration 91

Configuration

Updating Firmware (HP-Qualified Only)

Obtain the latest disk or BCC firmware release from the support site

before traveling to the customer site.

For specific information about updating firmware, see the HP

CommandView SDM Disk System Installation and User Guide, Version

1.04.

For specific information about updating firmware using HP TopTools

5.5, see the HP TopTools 5.5 User Guide.

Command View SDM

This configuration tool is supported on three different operating

systems:

■ HP-UX

■ Windows

■ Linux Redhat

Installation varies depending on the chosen operating system. After

installation, Command View SDM operation is virtually identical for all

three operating systems.

The Command View SDM software provides both server and client

applications. If you are operating as a client (on a host not directly

connected to the array), you must be assigned access permission to the

array from the server (host directly connected to the array) to access the

array for Command View SDM management.

Note Examples in this section occasionally identify a path.

When only one path is shown, either Windows path

separators “\” or UNIX/Linux path separators “/” will be

used. If you use an example, use the path separators

appropriate for your operating system.

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 157 158

Pas de commentaire

Red Hat Server tc3100 Guide de l'utilisateur Page 91